Hydrite offers a broad range of foam control technologies to the Paint and Coating market to assist in the production and application of those products. Hydrite's full line of defoamers, antifoams and air release agents are designed to help both the small market producer as well as the large multi-national producers. The Hydrite foam control line is designed to work in solvent-borne, water-reducible, water based and 100% active systems. Our products work in paints and coatings based on starting materials such as acrylics, alkyds, epoxy, polyurethane, PVOH, SBR and terpolymers. We also offer free in-lab testing of our product line to assist in determining the optimum product for your system.
| Patcote® 460: |
A specialty solution designed for difficult solvent-borne systems. |
| Patcote® 519: |
A specialty defoamer formulated for difficult systems where foam is enhanced by high-foaming acrylics. |
| Patcote® 841: |
A very strong and efficient antifoam for use in the grind and letdown phase of paint manufacturing. |
| Patcote® 890: |
Specialty antifoam designed to deliver superior foam control in clear coats and help eradicate microfoam, especially in epoxies. |
| Suppressor 1838: |
A very versatile antifoam that works extremely well in acrylic and modified acrylic coatings without creating leveling problems. |
| Suppressor 2132: |
A concentrated antifoam designed to work very efficiently in solvent-borne and high solids systems. |
| Suppressor 2219: |
A versatile foam control agent designed to work both in the grind and let-down phases of Paint manufacturing. |
| Suppressor 2233: |
A relatively low cost approach to foam control in a wide variety of paint systems. |
| Suppressor 2235: |
A concentrated foam control agent that will work in the difficult systems, such as EIFS coatings. |
| Suppressor 2333: |
A concentrated, synthetic antifoam designed to work in the difficult systems. Very low VOC. |
